Nokia RM-922 Cell Phone User Manual


 
Charge the battery
Your battery has been partially charged at the factory, but you may need to recharge it before you
can use your phone.
1. Plug the charger into a wall outlet.
2. Connect the charger to the phone. When done, unplug the charger from the phone, then from the
wall outlet.
If the battery is completely discharged, it may take several minutes before the charging indicator is
displayed or before any calls can be made.
Tip: You can use USB charging when a wall outlet is not available. Data can be transferred while
charging the device. The efficiency of USB charging power varies significantly, and it may take
a long time for charging to start and the device to start functioning.
Set which SIM card to use
By default, your phone asks you which SIM to use for the connection. You can also set the default
SIM for calls or messaging. If you name your SIMs, you can see at a glance which is, for example, for
work or personal use.
Tap
Settings > Dual SIM.
1. Switch Always ask to Off
.
2. Select which SIM to use for which connection.
Availability of SIMs
If you only have one SIM, put it into the SIM1 holder. Some features may only be available with the
SIM in the SIM1 holder.
When you set one SIM to be used for outgoing calls or messages, or for data connections, the
other SIM can still receive calls or messages.
When one SIM is having an active connection, the other SIM is not available.
Rename SIM
Tap SIM settings, and type in the new name under the card you want to name.
Copy contacts from your old phone
Get all your contacts to your new phone in one go.
Your old phone must have Bluetooth, and the contacts must be stored in the phone memory, not on
the SIM.
1. On both your new and old phone, switch Bluetooth on, and make sure both phones are visible to
others.
© 2013 Nokia. All rights reserved.
7