Nokia X3-00 Cell Phone User Manual


 
You can remove or replace the
memory card without switching the
device off.
1 Ensure that no application is
currently accessing the memory
card.
2 Open the cover of the memory
card slot.
3 Press the memory card slightly
in to release the lock, and
remove the card.
Charge the battery
Your battery has been partially
charged at the factory. If the device
indicates a low charge, do the
following:
1 Connect the charger to a wall
outlet.
2 Connect the charger to the
device.
3 When the battery is fully
charged, disconnect the charger
from the device, then from the
wall outlet.
You can also charge the battery with
a USB data cable connected to a
compatible computer.
1 Connect the USB cable to a USB
port of a computer and to your
device.
2 When the battery is fully
charged, disconnect the USB
cable.
You do not need to charge the
battery for a specific length of time,
and you can use the device while it
is charging. If the battery is
completely discharged, it may take
several minutes before the charging
indicator appears on the display or
before any calls can be made.
Charging the device while listening
to the radio may affect the quality of
reception.
8Get started
© 2010 Nokia. All rights reserved.