DNS addresses — Enter the IP addresses of the primary and secondary DNS servers,
if required by your service provider. To obtain these addresses, contact your internet
service provider.
Proxy server address — Enter the address of the proxy server.
Proxy port number — Enter the port number of the proxy server.
WLAN access point settings
Select Menu > Settings and Connectivity > Destinations > Access point, and
follow the instructions.
Edit a wireless LAN (WLAN) access point
Select an access point group and access point marked with
. Follow the
instructions from your WLAN service provider.
Select from the following:
WLAN network name — Select Enter manually or Search for networks. If you
select an existing network, the WLAN network mode and WLAN security mode are
determined by the settings of its access point device.
Network status — Define whether the network name is displayed.
WLAN network mode — Select Ad-hoc to create an ad hoc network and to allow
devices to send and receive data directly; a WLAN access point device is not needed.
In an ad hoc network, all devices must use the same WLAN network name.
WLAN security mode — Select the encryption used: WEP, 802.1x, orWPA/
WPA2 (802.1x and WPA/WPA2 are not available for ad hoc networks). If you select
Open network, no encryption is used. The WEP, 802.1x and WPA functions can be
used only if the network supports them.
Homepage — Enter the web address of the starting page.
136 Connectivity
© 2009 Nokia. All rights reserved.136
