Filter
Top Products
15
Operation and setup of the cordless handset
1. With the caller on line, press and hold INT key on the calling unit and
input the called unit number. The line will put on hold and the caller will
hear hold music.
2. After the called unit answers the call, the intercom will begin between
the calling unit and called unit.
3. If you want to transfer the call to the called unit, only need to end the
call at the calling unit. The call will be automatically transferred to the
called unit.
Note:
If the called unit doesn’t answer the intercom call within
30seconds, the calling unit will return to the talk mode with the
caller.
Call waiting (Australia only)
You can use the recall function to answer a second call while you are on
the phone. However this service needs to be turned on. For example, to
turn on Telstra’s Call Waiting service:
1. Press [
] on the cordless handset to wait for dial tone then press
[
] [4] [3] [#].
2. You will hear a service tone then press [
] again.
Take two different calls at the same time
During a call, you will hear two loud beeps periodically to notify you of
another incoming call. If you wish to answer this call,
1. Press [ ] key. You will hear a dial tone.
2. Press [ 2 ] to put the current call on hold and talk with the second
caller.
3. Repeat steps 1-2 to swap between the two callers.
Three-way Conference call
You may have a 3-way conference call using the intercom and an open
line.
PIX2000 User Guide.indd 章节2:15PIX2000 User Guide.indd 章节2:15 2009-6-30 17:33:322009-6-30 17:33:32