Filter
Top Products
16
Operation and setup of the cordless handset
1. With the caller on line, press INT key on the calling unit and input the
called unit number. The line will put on hold and the caller will hear
hold music.
2. After the called unit answers the call, the intercom will begin between
the calling unit and called unit.
3. Press
key on the handset to enter menu, then press or
key to select “CONFERENCE”, press key on the handset to
con rm. The three-way conference will begin among the calling unit,
the called unit and the caller.
Note:
Only the calling unit can operate the “CONFERENCE”.
Muting the Ringer volume
Press and hold key in standby mode to activate or deactivate the
handset Ringer. The
icon turns on or off.
Muting the Microphone
Press key to switch the microphone on or off during a call. The
icon turns on or off.
Paging the Handset
If a handset has been misplaced, it is possible to call all the handsets.
Short press the Page key on the base station.
To stop the page call:
Short press any key on the handset or press page key brie y on the
base.
Switching the Key Lock On/Off
Press and hold key to activate or deactivate the key lock. The icon
turns on or off.
PIX2000 User Guide.indd 章节2:16PIX2000 User Guide.indd 章节2:16 2009-6-30 17:33:322009-6-30 17:33:32