Filter
Top Products
18
Getting Started
Installing the SIM and the battery
The SIM (Subscriber Identity Module) card and the battery must be
installed before using your phone.
Before handling the SIM and the battery, ensure that the phone is
switched off and the charger is disconnected from the phone.
Inserting/removing the SIM
See “Inserting/removing the battery” on page 19 to remove or attach
the battery cover and the battery.
1. Slide the SIM holder in the
direction of the OPEN
arrow ; until it clicks, and
lift it up :.
2. Insert the SIM into the SIM
holder.
To remove the SIM, slide it
out of the holder.
3. Lay down the SIM holder ;
and slide it in the direction
of the LOCK arrow : until it
clicks.