Filter
Top Products
73
Settings
Charge settings
You can check the service charge settings or reset the settings.
d Main menu > Settings > Calls > Call Service > Charge
settings
1. [192] to scroll to the required setting 7 [5] (Select or
Change)
(If one of the settings except for Auto display is selected, go to
the next step.)
2. [5] (Edit) 7 Enter the PIN2 code 7 [5] (OK)
3. Follow the operation shown below:
Currency
You can set the currency unit in which your service rate is
determined. Firstly, Personal rate must be entered.
Enter the currency unit (max. 3 characters) 7 [5] (Save)
Personal rate
You can set your personal rate. This is the cost that the
service provider charges for one unit of call time.
[192] to scroll to Per unit: or Per min.: 7 Enter the
value 7 [5] (Save)
Max cost
You can set the maximum cost of calls allowed.
To set the Display credit:
[192] to scroll to Display credit 7 [6] (Change) to
switch on/off 7 [5] (Save)
To set the Max cost:
[192] to scroll to Max cost 7 Enter the credit limit 7
[5] (Save)
Auto display
In Idle mode, the cost of the last dialled call is displayed
automatically.
Note: The duration of one unit may vary between peak and off-peak times.
Call charges can be calculated accordingly. However, the actual tariffs
charged by your network operator may not be reflected in the calculation.