Filter
Top Products
77
Settings
Changing PIN/PIN2
You must enable the PIN before changing the code. See “PIN
control” on page 76.
d Main menu > Settings > Security > Codes
1. [192] to scroll to Change PIN or Change PIN2 7 [5]
(Select)
2. Enter the current code 7 [5] (OK)
3. Enter a new code 7 [5] (OK)
4. Enter the new code to verify 7 [5] (OK)
Fixed dial
The Fixed dial feature allows you to limit your outgoing calls to a
certain set of numbers saved in FDN (Fixed Dial Number), which is
located in your SIM. When this function is on, only the Fixed dial
numbers can be dialled, and any attempt to call any other number
will fail. To enter Fixed dial numbers, see “Storing a contact in FDN”
on page 54. When the Fixed dial is on, any manually dialled phone
numbers must be the same as the numbers in the FDN, otherwise
the call cannot be made.
d Main menu > Settings > Security > Fixed dial
1. Enter the PIN2 code 7 [5] (OK)
2. [5] (Change) to switch on/off 7 [6] (OK)
Note: If either PIN or PIN2 is entered incorrectly several times (depends on
your SIM), the phone will be locked and then you will need to enter the PUK
or PUK2 code. If the PUK/PUK2 code is entered incorrectly 10 times, the
phone will cease to operate permanently. All information stored in the SIM
will be lost and the SIM will need to be replaced. Contact the service
provider for more details.
Note: If the PIN2 code is entered incorrectly several times, the PIN2 will be
blocked. To unblock the PIN2, you must enter your PUK2 code. If you enter
an incorrect PUK2 code 10 times, your SIM will be blocked permanently.