Filter
Top Products
114
Connect
Connect
Menu > Connect > Bluetooth
®
On your computer, run your Bluetooth
®
application.
Select Find Bluetooth Devices.
Your computer should Discover your phone.
On your computer select Pair, then enter the Passkey (any number from 1 to 16
digits).
On your phone enter the same Passkey then select Ok.
Installing the Data Connection Assistant software
The Data Connection Assistant software is supplied with your phone on the CD-ROM,
or it can be downloaded from www.panasonicmobile.com.
Follow the instructions provided to install the Data Connection Assistant.
Once the Data Connection Assistant is installed you need to set up a connection to your
Bluetooth
®
modem:
Select Start > Programs > Panasonic Data Connection Assistant > Data Connections.
If you are using a circuit switched connection:
Select Make New Connection.
Select Modem - (Panasonic P341i or Bluetooth
®
COM port from the Select a Device
window).
Enter the phone number for your Internet Service Provider (ISP).
If you are using a GPRS connection:
Select Make New GPRS Connection (GPRS).
Select Modem - (Panasonic P341i or Bluetooth
®
COM port from the Select a Device
window).
Enter the Access Point Name (APN) supplied by your GPRS network operator.
Note: Select Other/Skip modem install for operation with Bluetooth
®
.
Note: With some Bluetooth
®
USB adaptors you may need to add a modem on the correct
COM port for the Data Connection Assistant. To do this on your computer select
Start > Settings > Control Panel > Phone and modem options > Add > COMn,
where n is the Bluetooth
®
COM port number.