Filter
Top Products
62
Contacts list
Contacts list
Menu > Contacts list > Create
Entering DTMF digits in a phone number
You can enter DTMF digits at the end of a phone number, so that these numbers are
automatically sent after the main phone number.
Enter the phone number.
Press and hold 0 until a P is displayed at the end of the phone number.
Enter the DTMF digits, for example, the number to access voicemail messages.
When you call this number the DTMF tones are sent after 3 seconds.
Entering a picture
You can choose from Camera and Select. Choose Camera to take a picture with the
phone’s camera.
Select Camera.
Take the picture.
Press L to return to the Contact.
Choose Select to select a picture from your Data Folders.
‘Wild’ numbers
Wild numbers are spaces that you can store in a phone number. You must fill the wild
numbers before you can dial that phone number. You can use wild numbers in
conjunction with fixed dial, to, for example, restrict calls to a specific area by storing the
area code then adding the remainder of the number when it is recalled.
To enter a wild number:
While entering a phone number, press and hold 0, until _ is displayed.
When you recall this phone number, enter the required number to replace the wild
number.
Note: Location is the location number in your Contacts List.
If you put a contact in a group which has a ring type, case screen colour and
vibration alert, then these options are not available for the individual contact.