Filter
Top Products
Chapter 2
12 Getting Started
Standby Display
The standby display appears when your phone is on and in an “idle” state.
You can return to the standby display at any time (except during a call) by
pressing or by pressing and holding . The backlight turns on
automatically for 15 seconds when you power up the phone or when you
press any key.
Note:
The backlight remains on when the phone is plugged into
a DC Adapter.
Moving through the Menu
You access the Main Menu from the standby display:
MENU
is displayed on the bottom left side of the display. To access the
Main Menu, press the corresponding softkey ( ) on the keypad just
below where
MENU
is displayed. After entering the Main Menu, press
either softkey ( or ) to select the options displayed above them.
Within the menu, the selected feature or function is indicated by an arrow
( ). Use the navigation key scroll areas
as described in the table on
page
11
.
When an option is selected using the softkeys, the display changes to offer
another level of softkey options. This process continues until you have
responded to all display prompts and options for a particular softkey.
Shortcut Keys
You can quickly access many of the phone’s features by pressing shortcut
keys instead of scrolling through the numbered options on the display. For
a complete list of the shortcut keys, refer to the Menu Map on the inside of
the front cover. For example, you can select Key Volume by pressing
(MENU), then press (Tone Settings) and (Key Volume).