Filter
Top Products
The security settings enable you to restrict the use of your
phone to specific people and types of calls.
Your phone’s security features keep your phone and SIM
card safe from unauthorized use. You can either set a
password for your phone or use the Call Barring service
and Fixed Dialing mode to restrict which calls can be
made using your phone. Press the [Menu] Soft key, select
9.Settings, and then select 6.Security.
PIN1 Check
Press the scroll [l/r] key and [
o
] key for setup.
If you input the incorrect PIN1 code three consecutive times,
you will be prompted to input the PUK1 number. The default
is Disabled.
• Enabled: Input PIN1 whenever the power is turned on.
• Disabled: Does not input PIN1 whenever the power is
turned on.
Change PIN1
Change the PIN1 number.
You can change the PIN1 number only when the phone is
set for PIN1 Enable.
Phone Lock
This function allows you to lock your phone until the correct
Settings
84
password is input.
Press the [
o
] key after you type the password.
Change Password
This function allows you to change your phone’s password.
The default password is 1234.
Phone Barring
This function offers multiple methods to limit incoming or
outgoing calls. In general, the barring service becomes
activated by interoperating with the network, but phone
barring is made by the phone itself. Major functions are as
follows.
• Incoming: Limits all incoming calls.
• On: Sets up all incoming calls barring.
• Off: Cancels all incoming calls barring.
• Outgoing: Limits all outgoing calls. When you attempt
to make a call that has the prefixed number that you
previously registered, the call is barred.
• Bar All: Sets up all outgoing calls barring.
• Bar Prefixed: Adds and deletes the prefixed number. (Prefix
also means your 10 or 11 digit number of your choosing)
• Off: Cancels all outgoing calls barring including the bar prefixed.
070209_C3B_EN.indd 84 2007.2.9 2:38:43 PM