Filter
Top Products
11
Get started
3 The SIM phonebook is the default and you must select Phonebook
>
Phonebook Settings > Phonebook select > In phone to switch
phonebooks.
First call
1 Enter the phone number (if you make a mistake, press
e
) and press
+
.
2 Once connected, your phone emits 2 beeps. To end the call, press
-
.
Charge the battery
Your phone is powered by a rechargeable battery. A new battery is partially
charged and an alarm will warn you when the battery reaches low.
L
We recommend that you do not remove the battery when the phone is switched
on: you may lose all your personal settings (see info on battery safety, page 89).
1 Once the battery is clipped on the phone, plug the charger (supplied with
the phone, in the box) into the right hand socket at the base of the phone
as shown below
.
2 Plug the transformer unit into a main AC power socket with easy access.
The symbol indicates the state of charge:
• During charging the 4 charge indicators change; Each bar represents
around 25% of charge.
•
When all 4 bars are steady the battery is fully charged and
you can disconnect the charger
.
• When the battery is charged, remove the connector by pressing the
release button on top of the connector.
Fisio825_GB_4311 255 53812.book Page 11 Vendredi, 18. octobre 2002 9:45 09