Filter
Top Products
Main features
16
Flash dial
Instead of accessing the Phonebook menu and scrolling through the list of
names, you can link the relevant name card to a hotkey, so that a long press on
the chosen key will directly call him (e.g. long press on
2
to call your home
or on
3
to call your office).
L
You can only program keys
2
to
9
, as keys
0
(selection of the language)
and
1
(voice mailbox) are predefined and cannot be changed.
1 To set a hotkey for flash dial, press
C
, select Settings, Hotkeys and
press
,
.
2Select a key from
2
to
9
and press
,
.
3 Then select Flash Dial, press
,
, select a name in the Phonebook
displayed and press
,
.
4 If several numbers are stored for this name, select the one of your choice
and press
-
to store it.
5 In idle mode, press and hold the programmed hotkey to dial the
associated entry: the connection is established. Press
-
to hang up.
L
You can also set hotkeys for commands (see “Hotkeys” page 32). Hotkeys can
be changed or deleted at any time.
Voice dial
Voice dial also allows you to quickly call a name from your phonebook: instead
of programming a hotkey, you simply set a voice command by recording a word
that will call the corresponding name when pronounced.
1 To set a voice tag for voice dial, press
+
, select the name of your
choice in the list and press
,
.
2 Depending on the selected phonebook (see “Phonebooks” page 40),
choose:
- SIM phonebook: Voice dial and press
,
,
- Phonebook in phone: Show and press
,
, then select the phone
number of your choice if several numbers were stored for this name
and press
,
. Then select Voice dial in the carousel menu, and
press
,
.
Flash dial
Voice Dial
Fisio825_GB_4311 255 53812.book Page 16 Vendredi, 18. octobre 2002 9:45 09