Filter
Top Products
Disabling Phone Lock
The phone must be unlocked before the phone lock can be disabled.
1 From Idle
FQ
, select Phone Option > Security > Phone
Lock
FQ
2 From the pop up menu select status
FQ
3 Select Disable
FQ
4 Enter the 4-digit code
FQ
Using the PIN
The PIN protects your SIM against unauthorized use. If you enable the PIN,
every time the phone is turned on you will be prompted to enter the PIN.
The PIN2 controls security for the Fixed Dial Store, Call Charge metering
and Barred Dial.
If either PIN/PIN2 is entered incorrectly 3 times the phone will be locked
and the user will need to enter the PUK/PUK2 code.
Contact your service provider for the PUK/PUK2 code.
Note: If the PUK/PUK2 code is entered incorrectly 10 times, the phone
will cease to operate.
Enabling/Disabling the PIN
1 From Idle
FQ
, select Phone Option > Security > PIN
FQ
2 Use
a
select Status
FQ
3 Select Enable / Disable ,
FQ
4 Enter PIN (Between 4 and 8 digits)
FQ
Setting Quiet Mode
When required, the phone can be set up to vibrate when a call is received.
Quiet Mode enables the user to choose between Continuous,
Intermittent vibration alerts and a user defind ring volume when a call is
received.
1 From Idle
FQ
, select Personalise > Quiet Mode
FQ
2 Select Ring Volume
FQ
, adjust the ring volume as required
ZQ
3 select Vibration
FQ
4 Choose the vibration setting required; Continuous, Intermittent
or Disable,
FQ
12
Basic Operation