Philips EB-GD67 Cell Phone User Manual


 
WAP Browser
The phone’s WAP (Wireless Application Protocol) Browser enables the
user to access Internet services supported by the network, such as news,
weather reports, sport etc.
Browser Settings
Before Internet services can be accessed, the SIM must
be data enabled and the relevant configuration
information, entered into the phone.
These settings may have been pre-programmed by the
network operator.
Note: Modifying previously entered settings can cause failure of the
Browser.
1 From Idle
FQ
, select Browser > Browser Setting >
Server Setting
FQ
2 Two servers may be setup on the phone. Use
e
to select one or
other of the server settings
FQ
3 Use
e
to select Edit
FQ
A list of configuration parameters will be displayed. The parameter Name
will be highlighted and
Edit
will be displayed.
4
FQ
5 Enter the name of the WAP server
FQ
twice
6 Use
e
to select each of the other parameters in turn, edit the
information
FQ
twice
7 After all parameters have been entered,
FB
to return to the
previous menu level
8 Select the server setting that you have just edited
FQ
. Use
e
to select Set
FQ
Record your WAP settings in the table at the rear of this booklet for
easy reference.
57
WAP Browser