Filter
Top Products
3
B
EFORE
YOU
START
Insert the micro-SIM card
First, place the micro-SIM card into the
appropriate slot in the battery compartment
(the clipped corner should be at the top left).
Then, slide the card with your finger until it
stops.
Insert the battery
1. Keep the battery - and + on the top
facing the - and + of the telephone.
2. Slide the battery onto the contacts points
and press.
Replace the battery cover
Hook the battery cover onto the hinges on
bottom of phone and press forward until
the latch catches.
Charge the battery
With the battery inserted in the phone, plug
the connector into the right socket at the
base of the phone. Next, plug the
transformer unit into an AC power socket.
The only way to turn off the charger is to
unplug it, so use an easily accessible AC
power socket.
The battery icon on your phone’s display indicates the state of the charge
process:
• Bars moving = battery is charging.
• Bars steady = battery is fully charged.
• Battery outline flashing (see Troubleshooting p. 32)
You can switch the phone on and use it during charging.
The first time you charge the battery and later, if it is completely
discharged, the battery icon will only appear 2 to 3 minutes after
you connect the charger
.
PHILIPS
muc12fr.book Page 3 Lundi, 22. mars 1999 12:03 12