Sagem 920 Cell Phone User Manual


 
9
2. Getting started
2.2 Installing the SIM card
Switch off your phone; disconnect
the charger.
The SIM card is inserted beneath
the phones battery.
Turn your phone over and
remove the battery by pulling on
the strip on the lower part of the
phone: it lifts up and you can
release it.
Slide the card along the base
beneath the retaining plate, with
the gold coloured sections facing
towards the phone and the cut-
off corner lined up to match the
drawing on the phone.
Replace the battery by first
positioning the upper section
then pressing it until it locks.
PIN code
This is the personal code for your
SIM card. This code could be
requested of you when you switch
on your phone.
Enter the code of between 4 and
8 digits given to you by your
operator. These digits will not be
displayed on the screen for
security reasons.
Press # or Ok to validate.
PIN2 code (*)
This second code if it was given to
you by your operator, provides
security of access to certain
functions.
Attention
If the wrong PIN
code is entered
three times in a row,
the card will be
blocked. To unlock
your card, call the
organisation from
which you obtained
this card, they will
guide you on the
procedure to use.
If your SIM card is
permanently locked,
contact your
Operator or your
Service Provider to
obtain a new card.