Filter
Top Products
40
WAP
The
GSM parameters
to be entered are:
- User name
- Password
- IP address of WAP gateway
- Port type (secure or insecure)
- Call number
- Access mode (digital, analogue or automatic)
In automatic mode access can be gained to the operator's network by a
digital link and by an analogue link to a different network (in roaming).
The
GPRS parameters
to be entered are:
- User name
- Password
- IP address of WAP gateway
- Port type (secure or insecure)
- APN: if no APN has been defined, press the
right programmable
key
(
Choice
) then the APN menu.
Select or add and APN.
Once all the settings have been entered, you can activate the chosen
access provider. Select him from the list. Confirm your choice with
OK
.
Inactivity time
is used to choose the time after which the call is
automatically disconnected if you have forgotten to log off from a service.
Using the
Welcome
menu, you can log onto your access provider's
WAP site by pressing the
right programmable key
.
If you are logging onto the GSM network, the @ symbol flashes, the
metering of the cost of the call starts as soon as it stops flashing.
WAP Logging on
The connection to a WAP service
on the GPRS network is not cut i
f
an incoming call is received. You
can answer the call.
251400892 myX3-2 English.book Page 40 Jeudi, 27. novembre 2003 2:10 14