Filter
Top Products
125
RReeffeerreennccee IInnffoorrmmaattiioonn
124
PIN code
The PIN (Personal Identification Number) code protects
your SIM card against unauthorised use. The PIN code
is usually supplied with the SIM card. When the PIN
code request is enabled (Menu 5-3-1), the code is
asked each time the phone is switched on.
If you key in an incorrect PIN code three times in
succession, key in the PUK code and press the
OK
soft
key. Key in a new PIN code and press the
OK soft key.
Key in the new PIN code again and press the OK soft
key.
PIN2 code
The PIN2 code, supplied with some SIM cards, is
required to access some functions, such as charging
unit counters. These functions are only available if
supported by your SIM card.
If you key in an incorrect PIN2 code three times in
succession, key in the PUK2 code and press the OK soft
key. Key in a new PIN2 code and press the OK soft
key. Key in the new PIN2 code again and press the OK
soft key.
Reference
Information
Access Codes
There are several access codes that are used by your
phone and its SIM card. These codes help you protect
the phone against unauthorised use.
The access codes (except for the PUK and PUK2
codes) can be changed using the Security Settings
menu (5-3) options. See page 94 for further details.
Phone Password
This security code can be used to avoid unauthorised
use of the phone. The security code 0000 is the
factory default setting but you are advised to change
the security code before you start using your phone.
Keep the new code secret and in a safe place, which
is separate from the phone.
If you key in an incorrect security code five times in
succession, the phone will not accept the correct
code for the next five minutes.