Filter
Top Products
86 2F. Speech to Action
3.
Hold the device so that the microphone is
approximately six inches away from your mouth
and you can clearly read the onscreen number
sequences.
4. Repeat either the digits or words shown onscreen
using a normal tone of voice.
Ⅲ If the device cannot recognize your words, it will
continue to display the same information
onscreen.
5. Repeat the previous step for the remaining sets of
digits or words.
6. When you are finished with a full session, you will
reach a screen that reads, “Adapting.”
Resetting Voice Recognition
1. Press .
2. From the “Say a Command” page, touch Settings >
Adaptation > Reset Voice. (The device displays a reset
voice dialog.)
3. Touch Yes to reset the voice recognition
parameters or
No to exit.
Using Choice Lists
If your device is not confident it has recognized a name
or number correctly, it might display a choice list and
prompt you with “
Call?” followed by the first choice on
the list. To confirm the choice, say “
Yes,” or to hear the
next choice, say “
No.” You can also select the correct
choice by touching the associated onscreen option. To
cancel the command, say “
Cancel,” or to say the name
or number again, say “
Repeat.”
Enabling and Disabling Choice Lists
You can customize whether the Voice Recognition
feature displays either a list of top Voice Recognition
choices or automatically dials the first number without
displaying a choice list.
Note
It is recommended that you perform the complete
Adapt Voice session at least once to achieve the
maximum benefit of this feature. If a partial
adaptation is performed, you can always return later
and resume the process from the halfway point.
M800Mini.book Page 86 Friday, May 29, 2009 4:04 PM