Filter
Top Products
Access Codes
116
To re-enable your PIN, proceed as follows.
1. Key in the PUK and press the
OK
soft key.
2. Enter a new PIN of your choice and press the
OK
soft key.
3. When the
Confirm New PIN
message is displayed, key in
the same code again and press the
OK
soft key.
If you enter an incorrect PUK ten times in succession, the
SIM card becomes invalid. Contact your service provider for
a new card.
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM cards, is
required to access specific functions, such as setting the
maximum cost of a call. These functions are available if
supported by your SIM card.
If you enter an incorrect PIN2 three times in succession, the
code is disabled and you cannot access the functions until
you re-enable it by entering the PUK2.
To change the PIN2, refer to (
Menu 6.6.7
).
PUK2
The 8-digit PUK2 (
P
ersonal
U
nblocking
K
ey
2
), supplied with
some SIM cards, is required to change a disabled PIN2. If
you lose the code, contact your service provider.
To re-enable your PIN2, proceed as follows.
1. Key in the PUK2 and press the
OK
soft key.
2. Enter a new PIN2 of your choice and press the
OK
soft key.
3. When the
Confirm PIN2
message is displayed, key in the
same code again and press the
OK
soft key.
If you enter an incorrect PUK2 ten times in succession, you
will not be able to access the functions requiring the PIN2.
Contact your service provider for a new card.