Filter
Top Products
79
Managers
•
Server ID
: set the ID of the remote
server
•
Server password
: set the password
that must be used by the device
manager to sync your device
•
Access point
: set an access point
•
Host address
: set the web address
of the host server
•
Port
: set a port to use for the device
manager
•
User name
: set a user name for this
profile
•
Password
: set a user password for
this profile
•
Allow configuration
: set to allow
the server to configure your device
•
Auto-accept all requests
: set to
automatically accept new
configuration requests
•
Network authentication
: set to
require network authentication
4. When you are finished setting the
options, press <
Back
>.
Start a configuration session
1. In Standby mode, press [ ]
→
Tools
→
Device mgr.
2. Scroll to a server profile and press
<
Options
>
→
Start configuration
.
3. Press <
Yes
> to confirm.
4. If required, scroll to an access point
and press
the trackball
.