Filter
Top Products
Section 2A: Your Sprint PCS Phone - The Basics 21
Answering Calls
To answer an incoming call:
1. Make sure your phone is on. (If your phone is off, incoming
calls go to voicemail.)
2. Press to answer an incoming call.
Your Sprint PCS Vision Phone notifies you of incoming calls in the
following ways:
ⅷ The phone rings or vibrates (unless set to Silence All).
ⅷ The LED flashes.
ⅷ The backlight illuminates.
ⅷ The screen displays an incoming call message.
If the incoming call is from a number stored in your Contacts, the
entry’s name is displayed. The caller’s phone number may also be
displayed, if available.
The following options are also available:
ⅷ Press to quiet the ringer and send the call directly to
voicemail. You can also press and hold the volume key to send
the incoming call to your voicemail box.
ⅷ Press and release the volume key to quiet just the ringer.
Ending a Call
To disconnect a call when you are finished:
ᮣ Close the phone or press .
Tip:
To speed dial a phone number from standby mode, press and hold the
speed dial number. If the speed dial number is two digits, enter the first
digit, then press and hold the second digit. (For information on setting up
speed dial numbers, see “Assigning Speed Dial Numbers” on page 74.)
(This feature will not work when you are roaming off the Sprint
Nationwide PCS Network; when roaming you must dial using eleven
digits [1 + the area code + the phone number.])