Samsung SPH-A620 Cell Phone User Manual


 
as a second sample and then requests the phone number.
6. Enter the phone number on the keypad.
7.
To store the phone number, press <OK>. The number you
entered displays, along with the voice notification ‘Added’.
If the number you entered matches a name/number already
stored in your internal Phone Book, then the name also
displays.
8.
The screen then returns to the
Voice Dial
menu.
Setting Up Voice Dial
Voice Dial is always active once you have programmed the
phone with Voice Dial entries. To place voice activated calls,
press and hold <Talk>. Then say the name into the phone after you
hear the voice prompt and the beep.
You can also initiate a voice activated call by opening the flip,
when this feature is activated.
To change the Voice Dial setup options:
1.
From the Main menu, select
8:Voice Tools
.
2.
Select
1:Voice Dial
.
3. Select 4:Set Active.
4. Press the navigation key up or down to scroll between the
following options:
. # Only
Enables voice dialing by pressing and holding <#>.
. # and Folder
Enables voice dialing by pressing and holding <#>
(when the phone is open)(???), or by simply opening
the phone’s flip cover.
5. Select the desired option and press <OK>.
Placing a Call Using Voice Dial
To place a call if Voice Dial is inactive:
1.
Open the phone.
2.
Press and hold down <#>.(???)
3.
At the voice prompt, say the name into the phone.
.
The phone automatically places the call if it recognizes the
name.
.
If the phone does not recognize the name, it says “Who
would you like to call?” again and prompts “Locating
Name.”
.
If the phone is unable to recognize the name after two
attempts, it says “The name cannot be recognized” and
prompts “Cannot recognize name. Please check name.” The
phone returns automatically to standby mode, and you can
try the call again later.
Reviewing Voice Dial Entries
To review Voice Dial entries:
1.
From the Main menu, select
8:Voice Tools
.
2. Select 1:Voice Dial.
3. Select 2:Review. A list of your stored voice dial numbers
display (the names also display if stored in the internal
Phone Book).