101
Phone Settings
100
Phone Settings
Auto Light
Using this feature, you can specify the time for
which the backlight is to be used. This feature
helps conserve your battery power.
The following options are available:
Disable: the backlight is used according to the
setting in the Back Light menu option (Menu
5.7.2); see page 99.
Enable: the backlight is used only during the
specified period of time. Set the time when the
phone will turn on the light and turn it off, using
the appropriate number keys.
Service Light
This option allows you to select whether or not
the service light on the folder cover is used or in
which color it flashes.
Select one from the seven color settings
available. When the phone is ready for use, the
service light will flash in the appropriate color.
If you do not want to use the service light,
select Off.
Graphic Logo
This option allows you to display your operator’s
logo instead of its name.
Off: the operator name is displayed in the idle
mode.
On: the operator logo stored in your phone is
displayed in the idle mode; if no logo has been
stored, the operator name is displayed.
Extra Settings (Menu 5.8)
You can turn the automatic redialing or
answering features on or off.
To turn a Press the
feature
on On soft key.
A check mark is displayed in
front of the option.
off Off soft key. The check mark
is no longer displayed.
The following options are available:
Auto Redial: when this option is checked, the
phone makes up to ten attempts to redial a
phone number after an unsuccessful call.
Note: The interval between two call attempts
varies.
Active Folder: when this option is checked, you
can simply open the folder to answer a call.
When it is unchecked, you must open the folder
and press a key, depending on the setting of the
Anykey Answer option (see below).
Anykey Answer: when this option is checked,
you can answer an incoming call by pressing any
key, except the key and the Reject soft
key. To reject the call, press the key or
the Reject soft key.
When this option is unchecked, you can only
press the key or Accept soft key.