Filter
Top Products
Bluetooth
Section 2K. Bluetooth 143
2. Select a device from the list and select Add to list.
3. Enter the passkey and press . (When the
owner of the other device enters the same
passkey, the pairing is complete.)
Waiting for Request
If you are going to be using a Dial-Up Network (DUN)
profile to pair with a computer or PDA, you will need to
allow the other device to initiate pairing with your
phone.
To allow your phone to be paired with another Bluetooth
device:
1. Press Menu > Tools > Bluetooth > Trusted Devices >
Add New > Wait for Request.
2. Follow the onscreen prompts to enter your passkey
and press .
Voice Caller ID
Hear an audio caller ID notification through your
Bluetooth headset. (The caller's name is announced if
the caller is in your Contacts list; otherwise, just the
caller's number will be announced.)
To enable Voice Caller ID:
1. Press Menu > Settings > Bluetooth > Voice Caller ID.
2. Select On and press .
To disable Voice Caller ID:
1. Press Menu > Settings > Bluetooth > Voice Caller ID.
2. Select Off and press .
Note
Due to different specifications and features of other
Bluetooth-compatible devices, display and
operations may be different, and functions such as
transfer or exchange may not be possible with all
Bluetooth-compatible devices.
Note
If a caller's ID is blocked you will hear, "Call From
Private Number
" in your headset. If no information is
available, as with an out-of-area call you will hear,
"
Call From Unknown Caller" in your headset.
Z400.book Page 143 Monday, April 7, 2008 8:06 PM