Sanyo EP92H Cell Phone User Manual


 
SANYO provides LED drivers that support automatic gradation production using full-color LEDs and can provide high-capacity
outputs up to a total of 500 mA using a switching power supply technique as well as white LEDs for backlights using a charge
pump method optimal for white LEDs.
2726
LED Driver ICs
These are LED drivers that can provide a high-capacity output up to a total of 500 mA using a switching power supply
technique, and cover applications such as main LCD backlights, sub-LCD backlights, camera flash systems, and full-
color LED indicators.
Gradation production using full-color LEDs is also supported (automatic).
MAIN
MAIN
MAIN
MAIN
3ch
CAMERA
CAMERA
CAMERA
CAMERA
SUB
SUB
3ch
SUB
SUB
Automatic blinking
(color changing) in
hardware is possible
13-channel 9-lamp LED driver
(Main LED: 4, Sub RGB: 1, Lighting LED: 3, Singe RGB:1)
Supports 3-color backlights appropriate for simply monochrome
displays for sub-displays.
Switching power supply technique: Can provide up to 500 mA output
Supports I
2
C bus
Ultraminiature package:QFN32 (4.0×4.0×1.0 mm
3
)
9 LEDs
Switching
500 mA
I
2
C
4 channels (Main LED:4 )
Charge pump power supply technique: Can provide up to 104 mA output
Supports brightness adjustment over a serial data input (10 steps)
Power saving mode
Soft start function
Input voltage 2.7 to 5.5 V
Ultraminiature package:VQFN16 (4.0×4.0×0.85 mm
3
)
Two groups for a total of 7 channels (Main LED: 4, Sub LED: 3)
Charge pump power supply technique: Can provide up to 140 mA output
Supports brightness adjustment using an external PWM input (input for each group)
Automatic switching between 1× and 0.5× step-up modes
Power saving mode
Soft start function
Input voltage 2.7 to 5.5 V
Ultraminiature package:VQFN16 (4.0×4.0×0.85 mm
3
)
This is a 4-lamp white LED driver for main LCD backlights that allows the brightness to be adjusted with an
external PWM input.
Generates the optimal voltages for white LEDs with a high-efficiency charge pump type step-up circuit.
Can provide a constant current output up to a total of 140 mA.
13-channel 11-lamp LED driver
(Main LED: 4, Sub LED: 2, Lighting LED: 4, Singe RGB: 1)
Switching power supply technique: Can provide up to 500 mA output
Three-wire serial bus support
Ultraminiature package:VQFN32 (5.0×5.0×0.85 mm
3
)
13-channel 11-lamp LED driver
(Main LED: 4, Sub LED: 2, Lighting LED: 4, Singe RGB: 1)
Switching power supply technique: Can provide up to 500 mA output
Supports I
2
C bus
Ultraminiature package:VQLP32 (4.0×4.0×0.85 mm
3
)
Switching power supply LED drivers
Under
development
LV5202PL
Under
development
LV5204PL
Under
development
LV5203FN
Charge pump type LED driver
Under
development
LC410591
Under
development
LC410592
VQLP32
2 RGB
AUTO
11 LEDs
Switching
500 mA
I
2
C
1 RGB
AUTO
11 LEDs
Switching
500 mA
3-wire
Serial
1 RGB
AUTO
4 LEDs
Charge pump
104 mA
3-wire
Serial
1 LED
Switching
80 mA
3-wire
Serial
1 RGB
AUTO
3-channel 1-lamp LED driver
(Singe RGB: 1)
Switching power supply technique: Can provide up to 80 mA output
Three-wire serial bus support
Ultraminiature package: VCT16 (2.6×2.6×0.85 mm
3
)
Drivers for 3-color LEDs that have an external control interface
Under
development
LV5213PL
7 LEDs
Charge pump
140 mA
PWM
Control