Sanyo SCP-2400 Cell Phone User Manual


 
9. Voice Services
Using Voice-Activated Dialing
You can use a Voice Dial tag to automatically dial a phone
number in your Contacts list. Your phone can store up to 30
Voice Dial tags.
Note: Please set the Voice Prompt feature (see page 29) to on before
using the Voice-Activated Dialing so that you can hear the voice
instruction from the phone. The default setting is off.
With the flip open:
1. Press or briefly.
2. Follow the voice prompts and recite the entrys Voice Dial tag
into your phones microphone.
With the flip closed:
1. Press and hold .
2. Follow the system prompts and recite the entrys Voice Dial
tag into your phones microphone.
Note: To use this feature, you must have stored entries (see
“Programming Voice Dial Tag to Your Phone” below).
Programming Voice Dial Tag to Your Phone
1. Press to access the main menu.
2. Select Voice Services.
3. Select Voice Dial.
4. Select Program.
5. The phone will prompt you to say the name you want to
program. Wait for the beep and then say the name.
6. Respond to the prompt by repeating the name after the beep.
7. Select the Voice Dial entry (name) in the Contacts list.
82