Filter
Top Products
15
Section 5
PROGRAMMING INSTRUCTIONS
5.1 Requirement
• PC (486 type or higher) with Microsoft “Windows” Operating System
• One COM-port free for usage
• The Data Transfer Cable (p/n 1-757-348-11)
PREPARATION FOR SOFTWARE UPDATE
5.2 Hardware set-up
• Copy all the files to the PC (define own directory).
• Connect the Data Transfer Jig to the PC COM-port (COM 1 or COM 2) and the CMD-J5/J16 external
connector.
• Attach battery pack to CMD-J5/J16; the CMD-J5/J16 is powered up from the battery pack.
• The initial settings of the flash.exe program may not correspond with the normally correct settings. It is highly
advisable to check the settings first (see 5.3 Software set-up).
5.3 Software set-up
5.3.1
∗ Download Software to Mobile (Software Update)
• Start the program flash.exe by double-clicking on its icon in the Windows Explorer.
J5 Flash.exe
DATA
TRANSFER
CABLE