Filter
Top Products
2
Power requirements 3.9 V (nominal)
Operating temperature -10
°
C to +55
°
C
Accessories operating temperature ± 0
°
C to +45
°
C
Connectors External RF connector
Bottom Connector (12-pin flat I/O connector)
Mini plug head set jack
Supplied accessories AC Adapter QN-3TC
Battery (std.) QN-J5BPS
AC cable
Optional accessories Headset QN-3HS
Battery (std.) QN-J5BPS
NOTE
This device contains electrostatically sensitive components. Damage can occur to these components
if the appropriate handling is not adhered to.
ESD Handling precautions:
A working area in which Digital Cellular Telephones may be safely handled without undue risk of
damage from electrostatic discharge must be available.
The area must be equipped as follows:
All working surfaces must have a dissipative bench mat, safe for use with live equipment,
connected via 1.2M
Ω
resistor to a common ground point.
A quick release skin contact device with a flexible cord, which has a built-in safety resistor of
a range between 5.2K
Ω
and 1.2M
Ω
shall be used. The flexible cord must be attached to a
dissipative earth point.
All containers and storage must be of the conductive type.