Sony Ericsson S710 Cell Phone User Manual


 
This is the Internet version of the user's guide. © Print only for private use.
6
Getting started
To insert the SIM card and charge the
battery
1 Slide the SIM card holder in the direction
marked OPEN. Lift the edge of the holder and
slide the SIM card into the holder slots with
the gold connectors as shown in the
illustration. Make sure the notch is aligned as
shown. Lay the SIM card holder back down
and slide the holder to lock the SIM into place.
2 Place the battery on the back of the phone with
the label side up and the connectors facing
each other.
3 Place the battery cover as shown in the picture
and slide it into place.
4 Open the connector cover and connect the
charger to the phone at the flash symbol. The
flash on the phone should be on the right side
when attaching the charger with the flash
facing upwards.
5 It may take up to 30 minutes before the battery
icon appears on the screen.
6
Charge for 4 hours or until the battery icon
indicates a full charge. If you do not see the
battery icon after this time, press any key or
to activate the screen.
7
Remove the charger by tilting the plug upwards.