Filter
Top Products
N
o
t
f
o
r
c
o
m
m
e
r
c
i
a
l
u
s
e
–
S
o
n
y
E
r
i
c
s
s
o
n
I
n
c
.
WAP 71
Password – your password to log on to the external data
network.
Passwd. request (Password request) – if this setting is on,
you are asked for a password each time you log on to the
external data network.
Accept calls – if you want to allow incoming calls
during a GPRS session, select
On. If not,
select
Off.
IP address – the IP address that the phone uses when
communicating with the network. If you do not enter a
value, the network provides you with a temporary IP
address.
DNS (Domain name server) – the name that the server
translates into a number.
Basic settings (Basic settings) – these are optional.
Consult your network operator.
Settings for GSM data
Phone Number – the phone number of your Internet
service provider.
User id, Password, Passwd. request. Same as for
GPRS above.
Data rate – select the speed you want for the
connection.
Dial type – select analog or ISDN connection.
If you want to change access type, you have to create a new
data account and select the access type you want to use.
GPRS and GSM Data Settings
If you have selected GPRS as the access type, the Preferred
service should be set to
GPRS&GSM. An icon may then
appear in the display telling you that GPRS is within range.
See “Icons” on page 88. If you have selected GSM data as
the access type, you should select
GSM only as the preferred
service. This setting is valid for all data accounts.
Selecting a preferred service
1Scroll to
Settings, Data comm., Pref. service.
2 Select
GPRS&GSM or GSM only.
Note! Your service provider may provision your WAP
settings so they are not viewable on your phone.
Note! To see the status of GPRS coverage and
connection, press the upper or lower side volume
key from standby to enter the Status menu and
then scroll to GPRS.