SpectraLink 8002 Cell Phone User Manual


 
SpectraLink 8002 Wireless Telephones Configuration and Administration (SIP)
52 PN: 1725-36034-001_B.doc
# PROXYn_MAIL_NOTIFY is from whom we might get unsolicited mail center
# notifications
# This option is deprecated and no longer needed in versions beyond
# e/h340/i640 phones v108.011, Polycom 8002 phones v130.001, and Polycom
# 8020/8030 phones 131.001.
# Examples:
#PROXY1_MAIL_NOTIFY = asterisk@10.0.0.138
#PROXY1_MAIL_NOTIFY = sip:asterisk@10.0.0.138
# PROXY1_MAIL_ACCESS is the main voicemail dial number
# Examples:
# PROXY1_MAIL_ACCESS = 7999
# PROXY1_MAIL_ACCESS = sip:7999@10.0.0.138
# PROXY1_MAIL_ACCESS = 7999@10.0.0.138
PROXY1_MAIL_ACCESS = 7999
#PROXY1_KEYPRESS_2833 controls generation of in-stream RFC2833 formatted key
# press events. Normally you want this to be disabled for Asterisk but it
# depends on your configuration and what you want to be able to do.
# If you are going to do OAI integration, this must be disabled.
# The default is disable
PROXY1_KEYPRESS_2833 = disable
#PROXY1_KEYPRESS_INFO controls generation of SIP INFO requests to the SIP
# server for keypress events. Normally you want this to be enabled.
# If you are going to do OAI integration, this must be enabled.
# The default is enable
PROXY1_KEYPRESS_INFO = enable
# PROXYn_HOLD_IP0 controls setting of media stream IP destination to 0.0.0.0
# when a call is put on hold.
# PROXYn_HOLD_IP0 is not required for current versions of Asterisk.
# For older PBXs that require this, set this to enable
#PROXYn_HOLD_IP0 = enable
# PROXY1_PRACK enables ACK'd provisional responses to INVITE requests. The
# PRACK mechanism will be used if this switch is enabled and the Proxy server
# specifies support for the PRACK mechanism. PRACK is NOT SUPPORTED in
# current versions of Asterisk, but is to be supported on subsequent
# versions. PRACK should not be required on local area networks.
PROXY1_PRACK = disable
# PROXYn_KEEPALIVE_SECS specifies that the phone should send Keep alives to
# the PROXYn server. It can be set to 0 or anywhere from 10 to 3600
# seconds. The default value (which is applied if no parameter is supplied
# in this file) is 0 which means the phone will not send keep_alives to
# PROXYn.
# If the phone fails to get a keepalive response within the SIP 32 second
# timeout, the keepalives are terminated for that PROXY until the next
# successful registration to the PROXY.
#
# This parameter is REQUIRED on Asterisk Business Edition with the Polycom
# 8002 phone but not with the Polycom 8020/8030 phones. This is because
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299