Filter
Top Products
114 Section 2I: Using Your Phone’s Voice Services
Voice Navigation Options
After you have associated a voice tag to a command, you
can select one of the following options:
ⅷ Playback—listen to the voice navigation tag.
ⅷ Change—change the voice navigation.
ⅷ Delete—erase the voice navigation tag.
Using Voice Tags to Dial a Phone Number
In addition to Sprint PCS Voice Command
SM
(see page 171),
you can use a voice dial tag to automatically dial a phone
number in your contacts. (A voice dial tag is a command
you record and use to place calls without using the
keypad.) Your phone can store up to 25 voice dial tags.
Assigning a Voice Tag to an Entry
Before you can use voice dialing, you must first assign a
voice tag to the number.
1. From standby mode, select Names.
2. Highlight the contact to which you want to assign a
voice tag. Select Details > Options > Add voice tag.
3. Press Start, wait for the tone, then speak clearly into
the microphone. Do not select Quit unless you want
to cancel the recording. The phone automatically
stops recording and saves and replays the voice tag.
4. After you have associated a voice tag to a contact, you
can select Menu > Contacts > Voice tags > Select a
contact > Playback, Change, or Delete.