Filter
Top Products
SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone
Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation
5. Using the Admin Menu on the Wireless Telephone, ensure the License
Management menu option is set to 014. This ensures the handset will check for
the proper MiNET files each time it powers on. See the NetLink e340/i640
Wireless Telephone Configuration section for detailed configuration instructions.
6. Power cycle the Wireless Telephone.
7. The MiNET code will now download to the handset. The status bar will increment
fully across the display for each function that is being performed in the download
process. Upon completion of the update process, the handset will re-boot with the
new firmware.
8. If the Wireless Telephone is statically configured, you may now enter the SVP IP
address and RTC address as detailed in the NetLink e340/i640 Wireless Telephone
Configuration section above.
9. Register the Wireless Telephone with the supported Mitel Networks VoIP
solution as if it were a Mitel Networks 5220 IP Phone and properly label the
handset with the appropriate extension.
For future software upgrades, simply update the files that are stored on the
TFTP Server. Each time the Wireless Telephone is powered on, it will
check with the TFTP Server to ensure it has the proper software version.
PN: 72-1084-02-D.doc Page 26