Filter
Top Products
When you receive an automatic callback for a CO Line, the seized line’s number
Automatic line Selection:
1.
[DN]
i
r-
2. CO Line
USING
3. Dial Access Code
/,,,,,I
If your station automatically accesses a
[PDN]
when you go off-hook, the three
character designation, “[NT” (Internal Dial Tone), displays to confirm this status.
If your station automatically accesses a CO line when you go off-hook, the
number of the seized CO line is displayed.
When you access a CO line by dialing a CO line group access code, the
accessed CO line number is displayed.
Alphanumeric Messages:
[iTF%RT-]
El_
Busy Field:
Messages up to 32 characters can be used in alphanumeric messaging.
Messages can either be programmed or set as one-time messages. (Messages
can also be used with a timed reminder.)
I::: 0::::::;::: ]
/<wa
The Busy Field (BLF) display indicates, in groups of IO, the last two digits of the
station Primary Directory Numbers that are busy on any type of
[DN] ([PDN],
[SDN],
or
[PhDN])
or set for Do Not Disturb (DND). Also, if a telephone’s
[PDNs]
are busy because they are in use on other telephones, the telephone will
show busy on the BLF, even though it may be idle. The top display indicates that
stations 200, 205, and 217 are either in use or in DND mode; the bottom display
indicates the same for stations 217, 222, 224, and 229.
If Page is pressed, the 200/210 group will change to 21 O/220, and the
busy/DND states of that group of stations will be displayed. The station groups
will increment each time Page is pressed, thereby eventually displaying all
stations.
8