Toshiba DK 280 Cell Phone User Manual


 
To Set a Called Station
Message:
1.
Press
MODE + 7 0
to
ensure that Soft Keys
are off.
2. Dial the station
Directory Number
(station does not
answer or is busy).
3. Press Mode.
4. Press 4.
5. Enter the desired
message number.
6. Press Msg.
7. Press Spkr or hang up
to release.
Message Sending
The Alphanumeric Messaging feature on your LCD digital telephone enables you
to set short text (up to 32 characters) at your station to ensure that you do not
miss important calls. Any station may record a message; however, only stations
with the LCD are able to display messages. Stations that do not use Soft Keys
(Soft Keys Off: Mode + 7 0) may send messages “live” to other LCD station
users. To record messages, see the Recording a Message section in this guide.
Your system has up to 40 preprogrammed messages that may be sent to other
LCD digital or electronic telephones. In order to leave a personalized message at
your station, you can temporarily add or change any of these messages.
Some stations may record and save up to 10 personal messages to be used for
all types of station messaging. This is a station option that is enabled in system
programming.
Called Station Messaging
Your station number and a message indication may be sent to another LCD
station. When that station responds, it will receive the message. Soft Keys must
be off (Mode + 7 0) at the sending station for this feature to operate.
The LCD displays “MODE?“.
The LCD displays “MW TO STNNN MSG NO?“.
Personal message (IO * 19), system message (60 = 99). The LCD displays the
message.
“CALL XXX-YYYM” is displayed at the called station and the Msg LED flashes;
“SENT MMM” is displayed at your station. XXX = the called
[DN], YYY =
the
[PDN]
of the station that sent the message, M indicates that a message has
been sent.
49