Filter
Top Products
:
:.
.
To Set a Calling Station
Message for Another
Station:
I. Press Mode when
your telephone is idle.
2. Press 9 5.
3. Dial the destination
[PDN].
4. Press Page.
5. Enter the desired
message number.
6. Press Page.
7. Press Mode.
8. Press 0.
To Send a Message to a
Busy Station:
1. Call the desired station
2. Press Mode.
3. Press 2.
4. Enter the desired
message number.
Remote Calling Station Messaging
The LCD displays “MODE?”
The LCD displays “MODE 95 DEST EKT NO.NNN.” This is the
[PDN]
to which
the Calling Station message will be set.
The LCD displays “MSG NO.?“.
The LCD displays the message.
The LCD displays “MSG NO.?“.
Note:
Remote calling station messaging allows you to set a calling station
message for only one station at a time.
The LCD displays “MODE NO.?“.
Your LCD shows the time and date. The message is displayed at the
“destination” station. Any station calling the “destination” station receives the
message.
Busy Station Messaging
When reaching a busy LCD station, a message can be sent to that station (an
audible tone will be heard). The busy station may also return a message to the
calling station’s LCD. The two stations may continue this procedure to carry on a
“silent” conversation. Soft Keys must be off (Mode + 7 0) at the sending and
receiving stations for this feature to operate.
Listen for a busy tone.
The LCD displays “MODE NO.?“.
The LCD displays “OVER TO STNN MSG NO?“.
Personal message (10 - 19) and system message (60 - 99). The LCD displays
the message.
51