Filter
Top Products
English - 11
Using Call Waiting
♦ Call Waiting, a service available from your telephone provider, lets you
receive calls while you are on another call. Caller ID on Call Waiting
(CIDCW) service displays Caller ID information for a waiting call.
♦ If you get a Call Waiting call, the phone sounds a tone and displays any
CID information received from the waiting call. Press
Flash
on the base or
Talk/Flash
on the handset to switch between the current call and the waiting
call; each time you switch, there is a short pause before you're connected to
the other call.
Using the Phonebook
The phone can store up to 100 entries in its phonebook. All stations share the
same phonebook, so only one station can access it at a time.
To... Press...
open/close the phonebook
PhonEbook
.
scroll through the entries
down
to scroll through the entries from A to Z.
uP
to scroll from Z to A.
jump to entries that start with
a certain letter
the number key corresponding to the letter you
want.
dial the current entry
Talk/Flash
or
sPEakEr
on the handset.
On the base, press
sPEakEr
.
edit the current entry
MEnu/sElEcT
, then select
Edit
.
delete the current entry
MEnu/sElEcT
, then select
Delete
. When the phone
prompts you to confirm, select
Yes
.
Adding Phonebook Entries
1. With the phone in standby, open the phonebook.
2. Press
MEnu/sElEcT
and select
Create New
.
3. The screen displays
Edit Name
. Enter the name and press
MEnu/sElEcT
.
4. The screen displays
Edit Number
. Enter the phone number (up to 20 digits)
exactly as you would dial it. Press
MEnu/sElEcT
.
If you need the phone to wait before sending the next set of digits, press
rEdIal/PausE
to insert a 2-second pause. You can insert multiple pauses, but
each one counts as a digit (you’ll see
P
in the display).
# If you are adding entries from a cordless handset, you will be
prompted to select a personal ring for that entry.
Deleting All the Phonebook Entries
1. With the phone in standby, open the phonebook.
2. Press
MEnu/sElEcT
and select
Delete All
.