Filter
Top Products
English - 18
2. During the greeting or beeps, press
0
and immediately enter your security
code. If you enter it incorrectly 3 times, the system hangs up and returns to
standby.
3. The system announces the time, number of
messages in memory, and a help prompt. It
beeps to indicate it's waiting for a command.
4. When you hear beeping, enter a 2-digit
command from the chart. Enter both digits
within 2 seconds or the entry times out.
# If you don't press any keys for 15 seconds,
the system hangs up and returns to
standby.
IMPORTANT INFORMATION
Solving Problems
If you have any trouble with your phone, check this section first. If you need
help, call our Customer Care Line listed on the front cover.
General problems Possible solutions
No stations can make or
receive calls.
x Check the telephone cord connection.
x Disconnect the base AC adapter for a few
minutes; then reconnect it.
A handset can’t make or
receive calls.
x Move the handset closer to the base.
A station can make calls,
but it won’t ring.
x Make sure the ringer is turned on.
x Make sure Silent Mode is turned off (see page 12).
A handset is not working.
x Charge the battery for 15-20 hours.
x Check the battery connection.
The phone keeps ringing
when I answer on an
extension.
x You may have to change the line mode. Contact
Customer Service for instructions.
Audio issues Possible solutions
Callers sound
weak or soft.
x Move the handset closer to the base or Range Extender.
x Keep the handset’s battery fully charged.
x Increase the earpiece volume.
01 Repeat message
02 Play message
03 Skip message
04 Delete message
05 Stop playback
06 Turn the system on
09 Turn the system off
10 Hear help prompts