UTStarcom Handset Cell Phone User Manual


 
Getting Started
10
Unread text and voice message
Battery charging level – the more blocks, the stronger the
charge
1.5 Using the Battery
1.5.1 Installing the Battery
As illustrated below, place the metal locators of the battery into the holes
located in the bottom of the unit.
1. Remove the battery cover from the phone by pressing the latch release
button and sliding the cover off the phone.
2. Place the battery onto the phone, bottom first so the tabs go into the
bottom of the phone and the metal connectors align. Then push the
battery down until it locks into place. Place the battery cover over the
battery and slide into place.
! Note: If the battery is not correctly placed in the compartment, the
phone will not turn on and/or the battery may detach during use.