Power Wash 250™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 16
The control panel located on the side of the fixture allows you to
access the main menu and make all necessary adjustments to the
POWER WASH 250™. During normal operation, tapping the
“MODE” key once will access the fixture’s main menu. Once in the
main menu you can navigate through the different functions and
access the sub-menus with the Up and Down buttons. Once you
reach a field that requires adjusting, tap the ENTER button to
activate that field and use the UP and Down button to adjust the
field. Tapping the Enter button once more will confirm your setting.
Once a setting is saved the LED will briefly readout OK to confirm a
new setting has been made and locked into memory. You may exit
the main menu at any time without making any adjustments by
tapping the MODE button.
Indicate the Staring DMX address
Activates the fixtures self test mode
Activates Sound-Active mode (slow)
Activates Sound-Active mode (fast)
Runs fixture as “MASTER” for Audio, Master-Slave mode
Runs fixture as “SLAVE” for Audio, Master-Slave mode
Room size adjustment (NORM-BIG-MIDL-SMAL) – This
adjustment is only functional when operating the fixture in
Sound-Active mode and makes adjustments to the pan and
tilt to coincide with a rooms dimensions
Manually switches lamp “on” and “off”
Resets the fixture’s pan, tilt, and internal wheels
Displays the total fixture running time (non destructible)
Displays a lamps running time (erasable) – Reset this
reading after every lamp change to keep an accurate
account of a lamps running time
Displays the total lamp running time (non destructible)
Manually activates a continuous color wheel scroll
Reverses the Pan movements
Reverses the Tilts movements
Manual drive of all device functions
Special Functions, Channel 12
Reed out actual DMX-values
MODE ENTER UP DOWN
MODE ENTER UP DOWN
LED-Display
Mode-key Enter-key Down-key
Up-key
