A SERVICE OF

logo

Power Wash 250™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 23
3.10.8 Adjustments and Calibrations (ADJU)
ADJU
With this function you can adjust and calibrate the positions of the different
wheels and other motors. This feature is reserved for a service technician
and is sometimes required after a service or repair work.
This function requires a service code only available to authorized service
technicians.
Use the Up and Down buttons to select the function that requires
calibration and press the Enter button to confirm the adjustment or the
Mode button to cancel and return to the menu. Use the Up and Down
buttons to set the adjustment values and confirm once more with the Enter
button or use the Mode button to cancel the operation.
Function
Value
Remark
COLO
- 99 - + 99
Color wheel
CLRE
Adjustments in the internal circuit.
FACC
Must read ON
ARES
Adjust- Reset
Authorized Personal
only. Refer to the
Service manual
3.10.9 Default Settings (DFSE)
DFSE
This function is used to restore all the factory default settings and presets.
Press the Enter button to confirm this operation or the Mode button to
cancel and return to the menu. When this operation is selected the LED will
briefly readout ok, then return to the previous function. The chart below
details the factory defaults.
Function
Display
Default Settings
DMX Address
D001
D001
Pan reverse
RPAN
ON
OFF
Tilt reverse
RTLT
ON
OFF
Automatic lamp on
LAAU
ON
OFF
Lamp on via DMX
DLOF
ON
OFF
Display
DISP
D ON
Cooling fan
FANS
HIGH
REG
LOOF
LOHI
Feedback
FEED
ON
OFF