A SERVICE OF

logo

Power Wash 250™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 21
3.10.2 Lamp On automatically (LAAU)
LAAU
This function automatically strikes lamp when main power is turned on. If
you would prefer to strike the lamp through a DMX controller you must turn
this function off. To toggle between Off and ON use the Up and Down
buttons. Use the Enter button to confirm your setting.
Please note: ON is the default setting for this function
3.10.3 Lamp Off via DMX (DLOF)
DLOF
This function allows the lamp to be switched off through a DMX controller.
To enable this function use the Up and Down buttons to toggle between ON
and Off. Turn this function on to allow DMX switching. Press Enter to
confirm or Mode to cancel and return to the menu.
3.10.4 DMX Readout (DMXI)
DMXI
This function will use the LED to readout the DMX values of each channel
received by the fixture. Use the Up and Down buttons to select desired
channel and press Enter to read its value.
Function
Value
Remark
PAN
0 - 255
Pan Position
TILT
0 - 255
Tilt Position
COLO
0 - 255
Color wheel (fixed colors)
SHUT
0 - 255
Shutter / Strobe function
DIMR
0 - 255
Dimmer
MOVE
0 - 255
Movements
SPEC
0 - 255
Lamp Off, Reset, ...
3.10.5 Display (DISP)
DISP
Use this function to choose between different display indications. Use the
Up and Down buttons to toggle between the two different display modes.