4. Operation
Operating Modes: The Power Wash 250B™ can operate in three different modes. This
next section will detail the differences in the operating modes.
• Stand alone mode -
The fixture will react to sound, chasing through the built-in programs.
• Master/Slave mode -
You can daisy chain up to 16 fixtures together to get a synchronized light show without
the need of an external controller. The fixtures will react to sound chasing to
synchronized light show.
• DMX control mode -
This function will allow you to control each individual fixtures traits with a standard DMX-
512 controller such as the LSC® Show Designer 2.
™
4.1 Universal DMX Control: This function allows you to use a universal DMX-512
controller such as the LSC® DMX Operator II™ or LSC® Show Designer 2™ to
control head movement, the color wheel, the shutter (strobe), and all other DMX
traits. A DMX controller allows you to create unique programs tailored to your
individual needs. The Power Wash™ uses 14 DMX channels. See page 27 for
detailed description of the DMX traits.To control your fixture in DMX mode, follow
the set-up procedures on pages 13-15 as well as the set-up specifications that are
included with your DMX controller.
4.1.1 Use the controller’s faders to control the various DMX fixture traits.This will allow
you to create your own programs.
4.1.2 Follow the instruction on page 18 to set the DMX address.
4.1.3 For longer cable runs (more than a 100 feet) be sure to use a terminator on the
last fixture.
4.1.4 For help operating in DMX mode consult the manual included with your DMX
controller.
4.2 Stand-Alone Operation (Sound Active): This mode allows a single fixture to run
to the beat of the music. Only use this mode when running a single fixture, or when
running several fixtures as individuals.
4.2.1 Mount your fixture in a secure and stable manner.
4.2.2 Access the main menu and select the AUDI function, this will give you access to
