103
MR-8HD Owner’s Manual (Track editing)
Track editing
This chapter describes how to edit whole data of a selected (mono
or stereo) track. Track editing does not consume the hard disk space.
Therefore, the remaining space of the disk does not change by ex-
ecuting track editing.
<Undo/redo of track editing>
By pressing the [UNDO/REDO] key after executing track editing, you
can undo the editing. By pressing the [UNDO/REDO] key after the
undo operation, you can return the track(s) to the condition after
being edited.
UNDO/REDO
DELETE
<Notes>
Also note that, if you carry out any of the following
after editing, you cannot undo the editing anymore.
1. Making new recording
2. Making new editing
3. Turning off the power
4. Loading another song
<Notes>
While a menu screen is shown, you can go up the menu screen level
or directly exit the menu mode by the following operations.
(1) Select “<< Back” on a menu screen and press the [MENU/ENTER] knob.
The display returns to the previous (upper level) screen. Repeating
this operation finally exits the menu mode.
(2) Press the [REWIND] key.
The display returns to the previous (upper level) screen.
Repeating this operation finally exits the menu mode.
(3) Press the [STOP] key.
The menu mode exits and the display shows the home screen.
