A SERVICE OF

logo

Open as PDF
next previous
If a blade server chassis is managed by VIOM, manual con-
figurations (not done by VIOM) of an IBP connection blade are not
supported. Manual configuration of IBP connection blades might
result in incorrect behavior of VIOM or get lost during configuration
by VIOM. Before managing a chassis by VIOM IBP connection
blades should be set to factory default setting except IP address con-
figuration of the administrative interface, user assigned name and
access protocol (SSH or telnet).
By default, the IBP module (IBP 10/6) is supplied with the following con-
figuration.
Figure 3: Standard configuration of the IBP module (10/6)
All uplink ports of the IBP module (IBP 10/6) are combined in one uplink set.
ServerView Virtual-IO Manager 31
2.4 Defining networks (LAN) (for blade servers only)