GPSMAP 4000 Series Owner’s Manual 25
Where To?
Where
to?
Creating and Using Waypoints
You can store up to 1,500 waypoints with a user-dened name, symbol, depth, and water
temperature for each waypoint.
To mark your current location as a waypoint:
From any screen, press the MARK key. The waypoint information screen displays for a few
seconds.
Edit Waypoint—designate a specic name, symbol, water depth, water temperature, or make
a comment about the waypoint.
Delete—delete the waypoint.
Move—change the location of the waypoint, either by selecting a different location on the map
or by entering grid coordinates.
Man Overboard—designate the current location as a Man Overboard location.
Next Page/Previous Page—switch between waypoint information and the navigation chart.
To create a new waypoint:
1. From the Home screen, select Charts > Navigation Chart.
2. By pressing the Rocker, use the map pointer ( ) to select the location you want to designate as
a waypoint.
3. Select Create Waypoint.
NOTE: Pressing MARK only creates a waypoint at your present location.
To mark a Man Overboard location:
When you mark a waypoint, you can designate it as a Man Overboard (MOB) waypoint. This marks
the point and sets a course back to the marked location. When an MOB is active, an MOB waypoint
with an international MOB symbol is created, and the chartplotter begins active navigation to that
point.
1. From any screen, press the MARK key.
2. Select Man Overboard.
•
•
•
•
•
