74 Chapter3
HP Easytime/XL Tasks
Backups
• Press F5 Yes to confirm.
• Press
F8 Close to close the monitoring screen and go back to Backup
Management.
It can take several minutes for the backup process to stop.
Verifying Backup Information
HP Easytime/XL prints a backup report listing every file backed up,
and every file the system was not able to back up. Check this report to
verify that all files have been successfully saved.
The name of the report file is ETBUPLST. This report can be viewed on
the Print File Management screen. This file can be quite large and so
the status in ON HOLD. Take the file off hold if you want to print it.
Setting Backup Options
Special default options can be specified when backing up the files. If you
are the system administrator, you can save these options permanently.
1. From the Backup Management screen, press
F2 O to open the
Options menu.
2. Press B for Set Backup Options.
A dialog box prompts for more information.
3. Type a file name, group, and account for the backup report. If the file
does not exist, HP Easytime/XL creates it.
4. If you are the system administrator, you can press
F6 Save to save
this setting permanently
Or, press F5 OK to save the backup options for this session only.
Setting Backup Device
Specify the backup device to be used when performing backups, or
storing and restoring files. If you are the system administrator, you can
save these options permanently.
1. From the Backup Management screen, press
F2 O to open the
Options menu.
2. Press D for Set Backup Device.
A dialog box displays a list of available backup devices.
3. Select a device from the list.
4. If you are the system administrator, you can press
F6 Save to save
this setting permanently.
Or, press F5 OK to save the backup device for this session only.
